Material Managing Energy UNIT 2
General Description
This power unit attributes power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing velocity controlled by the pressure compensated flow handle valve. Solutions of this series is often extensively used in the industry of logistic gadgets such as fork lift, mini lift table, etc.
Particular Notes
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities, N46 hydraulic oil is proposed .
4. Oil transforming is required after the preliminary one hundred operation hrs,afterwards as soon as every single 3000 hrs.
5. The electrical power unit should be mounted horizontally.
Material Managing Energy UNIT one
General Description
This power unit is made to the fork lift business, consisting of hugely productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down movement are managed from the lever on the manual release valve, which is equipped with an electrical switch to activate the motor. The lowing speed is controlled from the stress compensated movement manage valve.
Distinctive Notes
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned prior to installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities, N46 hydraulic oil is recommended .
four. Oil shifting is needed soon after the original one hundred operation hrs, afterwards as soon as just about every 3000 hours.
five. The 
energy unit proven is created to be mounted horizontally.