Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate material dealing with gear. The lowering motion is achived by the solenoid valve with all the decreasing velocity managed by an adjustable needle valve. The left and right functions are outfitted having a dual pilot operated test valve and cross-over relief valves.
Remark: Please talk to our product sales engineer for the unique pump displacement, motor energy or tank capability.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before set up of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is encouraged.
four. This energy unit need to be mounted horizontal.
five. Check the oil level from the tank following the very first begin on the energy unit.
six. Oil altering is required right after the first one hundred operation hours, afterwards when every single 3000 hours.