one.A connecting hyperlink of an O-ring Chain for basic application is pre-coated with grease in the pins. Ahead of connection, verify the grease on the surfaces of pins, and in the event the level of grease is smaller, apply grease with bare hands. (If gloves are made use of, the grease might be absorbed from the gloves.)
Instance: When the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted on the roots in the pins. If the O-rings come loose because of vibration throughout transport, refit the O-rings in towards the roots from the pins.
In this case, you should definitely return the grease collected at the roots on the pins to your central surfaces of your pins, more at portion A than at portions B shown within the above illustration. (Portions A is worn on account of sliding together with the bushings.)
two.The chain could be most easily connected about the teeth of a sprocket. Engage the links at each ends on the chain with the sprocket teeth and fit connecting pins. If the sprocket is often moved, the chain can also be linked to the loosened side.
3. Connecting method
1.Verify that O-rings are attached for the roots of the pins.
2.If the level of grease applied over the connecting pins is little, coat the pins with grease with the central portions.
three.Insert the connecting pins in to the bushings with the inner links at each ends.
four.Verify the grease is applied to the complete encounter from the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and when pressing the connecting plate, install the spring clip. Verify no matter whether the head (the finish with no split) of the spring clip is turned within the feeding path of your chain. (See the following illustration.)
6.Make sure you verify the spring clip is securely fitted inside the clip grooves of your connecting pins.
This completes jointing from the connecting link. Note that grease to the surfaces of connecting pins and O-rings could be removed all through installation perform. In this instance, re-grease working with the grease within the surface on the base chain or the grease in the polyethylene bag during which the connecting website link was contained.